2011 Caterpillar D6T XW
Category: Heavy Equipment > Crawler Dozers & Loaders
Make: Caterpillar
Model: D6T XW
Year: 2011
Hours: 4580
Phone:
Email:
Make: Caterpillar
Model: D6T XW
Model Year: 2011
Hours: 4580
Blade, Bucket Type: Blade - 6-Way
Net Horsepower (HP): 230
Type: Crawler Dozer
2011 Cat D6T XW, VPAT, 5,055 total hours, 1,930 Neutral hours, 3,125 Actual “working” hours. 100% New chains and sprockets. ARO Accugrade GPS Ready. Machine is good, clean & original with documented service history & oil samples. Rent or Buy.
• 5,055 Total Hours, ECM verified
• 1,930 Neutral Hours, ECM verified
• 3,125 Actual in operation working hours on this machine
• 32% Lifetime average Idle Time
• 1,337 Lifetime average RPM
• 4.84 GPH lifetime average fuel rate, Gallons per Hour
• 41% Lifetime total load factor
• Original Paint, original condition machine
• 100% New Chains and sprockets
• Factory ARO Cat Accugrade GPS Ready, does not come with hardware
• Enclosed Cab, A/C, Heat
• Rear screen
• Diff Steer
• VPAT, Variable Power Angle Tilt, 6 Way Blade
• Rear Drawbar
• Rear auxiliary hydraulics. w/ ripper joystick control
• Cat C9.3 Accert Engine. 230 HP
• 53,000 Pounds operating weight
Undercarriage measures as follows (based on Cat spec 120% being New):
• Cat System 1 Undercarriage
• Rail/Chain height measure 120% Remaining – New Cat Chains
• Links/Bushings on rails average 120% Remaining – New Cat chains
• Pads/Grousers – 118% Remaining, 28” wide Track pads
• Front Idlers –average 120% Remaining
• Rear Idlers – average 120% Remaining
• Bottom Rollers – average 92% Remaining
• Top Carrier Rollers – Average 103% remaining
This machine is Original, straight, clean, and as good as you can buy them in this price range. Came from a very good home with good maintenance and was used as a GPS finish machine. Documented history and clean oil samples.
Given time, this machine will undergo an extensive, quality assurance inspection at our facility, including a full Cat TA2 pressure testing inspection. Please call or email to verify completion, and have additional information and documentation emailed to you.
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. We offer Fair freight rates to any end point, and excellent financing programs if needed.
Call Sales at 563-872-4112, If you prefer to Text, Text only line to Josh @ 563-590-9903, or email sales@jjscheckel.com
The J.J. Scheckel family has been in the same exact location in Iowa for over 170 years. J.J. Scheckel Corporation is first generation company founded by Josh Scheckel. We operate a large heavy equipment fleet that we both Rent and Sell from to customers located throughout the world. J.J. Scheckel also performs complete machine rebuilds, and custom-build equipment projects in our 25,000 sq ft service facility in Iowa. We are different because we truly and sincerely care about doing things “The Right Way”. Please visit our homepage to watch our company video “The Right Way” and learn more about J.J. Scheckel Corporation.
Follow us on all social media platforms for immediate available equipment updates. We update daily on both Facebook and Instagram.
Engine | ||
Make | Caterpillar | |
Model | C9 ACERT | |
Gross Power | 228 hp | 170 kw |
Net Power | 200 hp | 149 kw |
Power Measured @ | 1850 rpm | |
Displacement | 537 cu in | 8.8 L |
Number of Cylinders | 6 | |
Operational | ||
Operating Weight | 46703 lb | 21184 kg |
Fuel Capacity | 112 gal | 424 L |
Cooling System Fluid Capacity | 18.5 gal | 76.8 L |
Engine Oil Capacity | 7.4 gal | 28 L |
Hydraulic Fluid Capacity | 13.6 gal | 51.5 L |
Powertrain Fluid Capacity | 38.5 gal | 145.7 L |
Final Drives Fluid Capacity | 3.6 gal | 13.6 L |
Operating Voltage | 24 V | |
Alternator Supplied Amperage | 95 amps | |
Transmission | ||
Type | Powershift | |
Number of Forward Gears | 3 | |
Number of Reverse Gears | 3 | |
Max Speed - Forward | 7.1 mph | 11.4 km/h |
Max Speed - Reverse | 9 mph | 14.6 km/h |
Undercarriage | ||
Ground Pressure | 6.7 psi | 46.3 kPa |
Ground Contact Area | 6780 in2 | 4.4 m2 |
Standard Shoe Size | 30 in | 760 mm |
Number of Shoes per Side | 41 | |
Number of Track Rollers per Side | 7 | |
Track Pitch | 8 in | 203 mm |
Hydraulic System | ||
Relief Valve Pressure | 2799 psi | 134 kPa |
Pump Flow Capacity | 49.9 gal/min | 189 L/min |
Standard Blade | ||
Width | 13.8 ft in | 4200 mm |
Height | 46 in | 1169 mm |
Capacity | 5.6 yd3 | 4.3 m3 |
Cutting Depth | 20 in | 500 mm |
Dimensions | ||
Length w/o Blade | 12.7 ft in | 3860 mm |
Width Over Tracks | 9.2 ft in | 2794 mm |
Height to Top of Cab | 10.5 ft in | 3195 mm |
Length of Track on Ground | 9.5 ft in | 2871 mm |
Ground Clearance | 1.3 ft in | 383 mm |
Monthly Payment | |
---|---|
3 Year | $8,356 - $8,966 |
5 Year | $5,643 - $6,298 |