HOURS: 2500
2013 Case SR220
$14,950
Listing Type: For Sale
Category: Skid Steer Loaders > Rubber Tire Skid Steers
Location: Cincinnati, OH
Make: Case
Model: SR220
Year: 2013
Hours: 2500
Serial Number: Ndm457603
Make: Case
Model: SR220
Year: 2013
Hours: 2500
Serial Number: Ndm457603
Phone:
Email:
Make: Case
Model: SR220
Model Year: 2013
Model: SR220
Model Year: 2013
Condition: Used
Hours: 2500
Serial Number: NDM457603
Hours: 2500
Serial Number: NDM457603
I have two 2013 CASE SR220 For sale in OH. $14950 each FOB OH. Run and operate. Tires are worn.
| Engine | ||
| Make | Case | |
| Model | 432T/M3 | |
| Gross Power | 82 hp | 61.1 kw |
| Net Power | 76 hp | 56.7 kw |
| Power Measured @ | 2500 rpm | |
| Displacement | 195 cu in | 3.2 L |
| Torque Measured @ | 1400 rpm | |
| Max Torque | 225 lb ft | 305.1 Nm |
| Number of Cylinders | 4 | |
| Aspiration | Turbocharged | |
| Operational | ||
| Operational Weight | 7400 lb | 3356.6 kg |
| Fuel Capacity | 25.5 gal | 96.5 L |
| Engine Oil Fluid Capacity | 2.6 gal | 10 L |
| Hydraulic System Fluid Capacity | 5.9 gal | 22.4 L |
| Chain Box Fluid Capacity - each side | 2 gal | 7.4 L |
| Operating Speed | 7.2 mph | 11.6 km/h |
| Max Speed | 11.9 mph | 19.2 km/h |
| Tire Size | 12 x 16.5 | |
| Operating Voltage | 12 V | |
| Alternator Supplied Amperage | 95 amps | |
| Loader | ||
| Operating Load Rating | 2200 lb | 997.9 kg |
| Tipping Load | 4400 lb | 1995.8 kg |
| Bucket Capacity | 0.61 yd3 | 0.47 m3 |
| Bucket Width | 72 in | 1828.8 mm |
| Hydraulic | ||
| Pump Type | Gear | |
| Pump Flow Capacity | 12.2 gal/min | 46 L/min |
| Relief Valve Pressure | 3000 psi | 20684.3 kPa |
| Dimensions | ||
| Length with Bucket | 11.8 ft in | 3600 mm |
| Length w/o Bucket | 9.8 ft in | 3000 mm |
| Width Over Tires | 5.9 ft in | 1800 mm |
| Height to Top of Cab | 6.6 ft in | 2000 mm |
| Clearance at Max Lift and Dump | 8.5 ft in | 2600 mm |
| Wheelbase | 4.3 ft in | 1300 mm |
| Ground Clearance | 8 in | 203.2 mm |
| Reach at Max Lift and Dump | 19.5 in | 495.3 mm |
| Turning Radius from Center - machine rear | 70.4 in | 1788.2 mm |
| Turning Radius from Center - inc bucket | 84.2 in | 2138.7 mm |
| Label | Rating | Comments | |
|---|---|---|---|
| Section: Electrical | |||
| Alternator | |||
| Back-Up Alarm | |||
| Batteries | |||
| Harness | |||
| Lighting | |||
| Starter | |||
| Section: Exterior | |||
| Attachment Condition | |||
| Attachment Type | |||
| Body | |||
| Cab | |||
| Section: Operational Checks | |||
| Tires/Tracks | |||
| Monthly Payment | |
|---|---|
| 3 Year | $504 - $540 |
| 5 Year | $340 - $380 |
*Rates are approximate. For Companies with lower credit ratings, rates may be increased.
All rates are subject to credit approval, and subject to change until funding occurs.
2019 John Deere 317G
$28,500
Hours: 4554
Narrows, VA 24124
2016 Caterpillar 259D
$42,500
Hours: 1110
Weatherford, TX 76088
2014 Case Ih 580 QUADTRAC
$348,000
Hours: 2950
Bellevue, IA
