Make an Offer!

2002 Caterpillar D11R


2002 Cat D11R Crawler Tractor,  A02643
$885,000
Listing Type: For Sale

Category: Heavy Equipment > Crawler Dozers & Loaders
Location: Bellevue, IA
Make: Caterpillar
Model: D11R
Year: 2002
Hours: 0
Serial Number: 7pz


Phone:

Email:

Photos
Equipment Specifics
Inventory ID: A02643
Make: Caterpillar
Model: D11R
Model Year: 2002
Hours: 0
Serial Number: 7PZ
Condition: Manufacturer refurbished
Blade, Bucket Type: U Blade
Net Horsepower (HP): 850
Operating Weight: Over 50,000 lbs
Type: Crawler Dozer
Item Description

2001 Cat D11R, 7PZ series, Zero Hour Powertrain Plus Rebuild, by OEM Cat Dealer. Warranty, New Undercarriage, Erops, Single Shank Ripper, U Blade. Machine has been under Cat Dealer care since new, Will be finished spring 2019. Read the Details – For Long-Term Rent, or Purchase.
 
· 7PZ Series
· This unit was perfect candidate for a powertrain rebuild, it was an easy duty, high usage, oil sands machine that was never used in rock, and therefore the track frames and machine itself, are very clean and super sound and solid. This machine was bought new and under OEM Cat Dealer maintenance since it was new.
 
Current Component Totals:
· Engine - 0 Hours, Ziegler Cat Major Rebuild, with 1 year warranty. New Reman Liner Packs, Bearings, Cylinder Heads, Turbos, Fuel System, Water Pump, Oil Pump.  
· Torque Converter - 0 Hours, Ziegler Cat Major Rebuild, with 1 year warranty.  
· Radiator – 0 Hours, Pressure tested, boiled, and resealed.
· Transmission – 0 Hours, Ziegler Cat Major Rebuild, with 1 year warranty.  
· Differential - 0 Hours, Ziegler Cat Major Rebuild, with 1 year warranty.  
· Right Final Drive - 0 Hours, Ziegler Cat Major Rebuild, with 1 year warranty.  
· Right Steering Clutch & Brake- Zero 0 Hours, Ziegler Cat Major, with 1 year warranty.  
· Left Final Drive - 0 Hours, Ziegler Cat Major Rebuild, with 1 year warranty.  
· Left Steering Clutch & Brake- 0 Hours, Ziegler Cat Major, with 1 year warranty.  
· Track Frames – Checked all Bogie Pins, and installed new where needed. Checked Track frames for cracks, and resealed track adjusters, Equalizer Bar, and Pivot Shafts.
· All Hydraulic cylinders, Blade, and Ripper. 0 Hours since Rebuilt
· All Hydraulic pumps, Pressure tested to Cat Spec.
· Cab Interior – Refurbished
· Wiring – New Engine main wiring harness.
· Hydraulic Hoses – Replaced as needed, anything showing wear.
· Undercarriage – 100% New with OEM Cat warranty
 
· Enclosed Cab, A/C, Heat, refurbished interior.
· Single Shank Ripper Installed. (Shank available at extra cost)
· U blade w/ twin tilt
· Engine Enclosures
· Clean, straight sheet metal
 
· This tractor will be fully Sandblasted and Painted, using OEM Polyurethane paint, and OEM Decals installed when finished.
 
· Cat 3508B, 850 HP Engine
· 230,000 operating weight
 
· Undercarriage measures as follows, (Based on Cat spec, w/ 120% remaining being new)
  Cat Brand, Heavy Duty PPR Rails / Chains
     - Rail/Chain height measure 120% Remaining, NEW OEM CAT, Positive Pin Retention
     - Pads/Grousers measure 120% Remaining – NEW 32” Wide Extreme Service Pads
     - Sprockets measure 120% Remaining – NEW
     - Qty 2, Front Idlers measure 120% Remaining - New
     - Qty 2, Rear Idlers average 120% Remaining - New
     - Qty 16, Bottom Rollers average 120% Remaining - New
 
We will consider Long-Term Rental for this machine.
 
Why we rebuilt this particular machine, was because its prior life, was an easy-duty machine, as easy as a Cat D11R could be. It strictly pushed overburden, the machine was NOT used in rock, the track frames and machine are extremely clean and solid. These types of machines make the best rebuilds.  This machine was bought new by customer, and under OEM Cat Dealer maintenance since new, components were replaced with new or reman every 18,000 hours. This unit was a great candidate for the Powertrain Rebuild we had our Cat Dealer perform.    
 
Besides the Ziegler Cat Dealer Rebuild on components, this machine is also getting an extensive pre-sale work order at our facility, including a full final Cat TA2 technical inspection of all component pressures to cat spec, All oils and filters on machine will be serviced as new, all systems and components will be checked, inspected, and rebuilt as needed, as listed above.
 
Upon completion, we will sandblast, prime, and paint the machine, with high-quality OEM urethane paint and factory decals.  Please call or email for additional information that we can email you, including the detailed work order. – This machine will be ready to go.   
 
Please call or email us, to request additional information, Work orders, history, and full pictures for this machine. We can also get you very fair freight rates to anywhere in the country.
 
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, will be available for this machine, on our website, www.jjscheckel.com.

Specification
Engine
Make Caterpillar
Model 3508B
Gross Power 915 hp 682.3 kw
Net Power 850 hp 633.8 kw
Power Measured @ 1800 rpm
Displacement 2105.3 cu in 34.5 L
Number of Cylinders 8
Aspiration Turbocharged and Aftercooled
Operational
Operating Weight 225500 lb 102285.1 kg
Fuel Capacity 388.6 gal 1471 L
Cooling System Fluid Capacity 61 gal 231 L
Engine Oil Capacity 28 gal 106 L
Hydraulic Fluid Capacity 54.2 gal 205 L
Powertrain Fluid Capacity 90.9 gal 344 L
Final Drives Fluid Capacity 7.9 gal 30 L
Operating Voltage 24 V
Alternator Supplied Amperage 100 amps
Transmission
Type Power shift
Number of Forward Gears 3
Number of Reverse Gears 3
Max Speed - Forward 7.3 mph 11.7 km/h
Max Speed - Reverse 8.7 mph 14 km/h
Undercarriage
Ground Pressure 23.6 psi 162.5 kPa
Ground Contact Area 9781 in2 6.3 m2
Standard Shoe Size 28 in 710 mm
Number of Track Rollers per Side 8
Track Gauge 9.5 ft in 2890 mm
Standard Blade
Width 20.8 ft in 6350 mm
Height 93.3 in 2370 mm
Capacity 45 yd3 34.4 m3
Cutting Depth 30.2 in 766 mm
Dimensions
Length w/o Blade 20.2 ft in 6160 mm
Length w/ Blade 29 ft in 8830 mm
Width Over Tracks 11.8 ft in 3600 mm
Height to Top of Cab 15.3 ft in 4660 mm
Length of Track on Ground 14.6 ft in 4440 mm
Ground Clearance 2 ft in 623 mm
Financing Calculator*
Monthly Payment
3 Year$29,819 - $31,995
5 Year$20,136 - $22,473

More Equipment Info
*Rates are approximate. For Companies with lower credit ratings, rates may be increased. All rates are subject to credit approval, and subject to change until funding occurs.
Shipping Calculator