Make an Offer!
HOURS: 10800

2006 Caterpillar D6R XW

2006 Cat D6R XW, Series 3, VPAT, A02649
Listing Type: For Sale

Category: Heavy Equipment > Crawler Dozers & Loaders
Location: Bellevue, IA
Make: Caterpillar
Model: D6R XW
Year: 2006
Hours: 10800
Serial Number: Hdc



Equipment Specifics
Inventory ID: A02649
Make: Caterpillar
Model: D6R XW
Model Year: 2006
Hours: 10800
Condition: Used
Serial Number: HDC
Blade, Bucket Type: Blade - 6-Way
Net Horsepower (HP): 230
Operating Weight: Over 50,000 lbs
Item Description

2006 Cat D6R XW, VPAT, 10,800 hours, 4,712 idle hours, ARO GPS Ready. Erops, A/C, Diff Steer, VPAT 6 Way Blade, Reputation Machine, Low Utilization, Very Straight and Clean.

•  HDC Serial Number Prefix
•  10,800 Total Hours, ECM verified
•  4,712 hours where at Idle, ECM verified
•  Only 6,088 actual hours in operation for this machine
•  Very Low Utilization
•  From Reputable Contractor, Fresh Paint and Decals

•  ARO, GPS Ready
•  Enclosed Cab, A/C, Heat
•  Diff Steer
•  VPAT, Variable Power Angle Tilt, 6 Way Blade
•  Rear Counterweight Drawbar
•  Lights option installed
•  Heavy Duty Hinged Radiator Guard
•  The GPS Radio and Hardware in the pictures, does not come with machine. All the wiring stays with machine.

•  Cat C9 Accert Engine, 230 HP
•  53,000 Pounds, operating weight

Undercarriage measures as follows (Based on Cat spec 120% being New):
Cat Standard Heavy Duty Undercarriage
•  Rail/Chain height measure 92% Remaining, Cat part # 378-8242
•  Links/Bushings on rails measure 40% Remaining
•  Pads/Grousers – 68% Remaining, 28” wide Track pads
•  Sprockets Average – 67% Remaining
•  Front Idlers Average– 80% Remaining
•  Rear Idlers Average – 96% Remaining
•  Bottom Rollers - average 90% Remaining

•  We have in Stock, Winch or Ripper to fit this machine, at additional cost.

 This machine is in from a Reputable Dirt Grading Contractor who has good maintenance program. The machine is in excellent condition, we are not finding any flaws with the machine. Should be a very solid unit both mechanically and cosmetically.

 This Machine is scheduled to go thru our shop, for an extensive, Pre Sale, Pre Rent work order. Please call for complete Work order detailed description. A few processes this machine will get, will be a Full Cat TA2 Pressure Testing Report, for the Engine, Transmission, Torque, and Hydraulic System. We will also service all oils and filters on the machine, and several other detailed procedures to insure this machine is ready to go to the field and work as intended.

  Please call or email us, to request additional information, Work Orders, UC Measurements, and Full Pictures for this machine. We can also get you very fair freight rates, to anywhere in the country.

We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website,

Financing Calculator*
Monthly Payment
3 Year$3,875 - $4,158
5 Year$2,617 - $2,920

More Equipment Info
*Rates are approximate. For Companies with lower credit ratings, rates may be increased. All rates are subject to credit approval, and subject to change until funding occurs.
Shipping Calculator