Make an Offer!
HOURS: 5100

2012 Caterpillar D6T XW

2012 Cat D6T XW, VPAT, A02647
Listing Type: For Sale

Category: Heavy Equipment > Crawler Dozers & Loaders
Location: Bellevue, IA
Make: Caterpillar
Model: D6T XW
Year: 2012
Hours: 5100
Serial Number: Rcw



Equipment Specifics
Inventory ID: A02647
Make: Caterpillar
Model: D6T XW
Model Year: 2012
Hours: 5100
Serial Number: RCW
Condition: Used
Blade, Bucket Type: Blade - 6-Way
Net Horsepower (HP): 230
Operating Weight: Over 50,000 lbs
Type: Crawler Dozer
Item Description

2012 Cat D6T XW, VPAT, 5,100 hours, 1,240 idle hours, ARO Cat Accugrade GPS Ready. Rear Paccar PA56 Winch, Erops, A/C, Diff Steer, VPAT 6 Way Blade, Machine is straight, clean & Original.  Rent / Lease or Buy.   
· RCW Serial Number Prefix
· 5,100 Total Hours, ECM verified
· 1,240 hours where at Idle, ECM verified
· Only 3,860 actual hours in operation for this machine
· 1,439 average lifetime RPM, as recorded by the ECM
· 5.77 gallons per Hour, average lifetime fuel Rate, as recorded by the ECM
· 49% average lifetime load factor, as recorded by the ECM
· Original Paint, Original condition machine

· Factory ARO, Cat Accugrade GPS Ready
· Enclosed Cab, A/C, Heat
· Diff Steer
· VPAT, Variable Power Angle Tilt, 6 Way Blade
· Rear Paccar PA56 Winch installed
· Rear Auxiliary Hydraulics
· Lights option installed
· Heavy Duty Hinged Radiator Guard
· Cat C9.3 Accert Engine, 230 HP
· 53,000 lbs operating weight
Undercarriage measures as follows (Based on Cat spec 120% being New)
· Cat System 1 Undercarriage
· Rail/Chain height measure 120% Remaining, Cat part # 234-9699
· Links/Bushings on rails measure 113% Remaining
· Pads/Grousers – 60% Remaining, 31” wide Track pads
· Sprockets Measure – 95% Remaining
· Front Idlers – 120% Remaining
· Rear Idlers – 120% Remaining
· Bottom Rollers - average 75% Remaining
· This machine qualifies for Rent, Lease & Finance options
· We can remove winch, and provide credit to buyer, if it is not needed.
 This machine is in from Cat Dealer Trade. The machine is in excellent condition, we are not finding any flaws with the machine. Should be a very solid unit both mechanically and cosmetically.

 This Machine is scheduled to go through our shop for an extensive, pre-sale, pre-rent work order. Please call for complete work order detailed description. A few processes this machine will get: a full Cat TA2 Pressure Testing Report, for the Engine, Transmission, Torque, and Hydraulic System. We will also service all oils and filters on the machine, and several other detailed procedures to insure this machine is ready to go to the field and work as intended.

 Please call or email us, to request additional information, work orders, UC Measurements, and full pictures for this machine. We can also get you very fair freight rates, to anywhere in the country.
 We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website,

Make Caterpillar
Model C9 ACERT
Gross Power 228 hp 170 kw
Net Power 200 hp 149 kw
Power Measured @ 1850 rpm
Displacement 537 cu in 8.8 L
Number of Cylinders 6
Operating Weight 46703 lb 21184 kg
Fuel Capacity 112 gal 424 L
Cooling System Fluid Capacity 18.5 gal 76.8 L
Engine Oil Capacity 7.4 gal 28 L
Hydraulic Fluid Capacity 13.6 gal 51.5 L
Powertrain Fluid Capacity 38.5 gal 145.7 L
Final Drives Fluid Capacity 3.6 gal 13.6 L
Operating Voltage 24 V
Alternator Supplied Amperage 95 amps
Type Powershift
Number of Forward Gears 3
Number of Reverse Gears 3
Max Speed - Forward 7.1 mph 11.4 km/h
Max Speed - Reverse 9 mph 14.6 km/h
Ground Pressure 6.7 psi 46.3 kPa
Ground Contact Area 6780 in2 4.4 m2
Standard Shoe Size 30 in 760 mm
Number of Shoes per Side 41
Number of Track Rollers per Side 7
Track Pitch 8 in 203 mm
Hydraulic System
Relief Valve Pressure 2799 psi 134 kPa
Pump Flow Capacity 49.9 gal/min 189 L/min
Standard Blade
Width 13.8 ft in 4200 mm
Height 46 in 1169 mm
Capacity 5.6 yd3 4.3 m3
Cutting Depth 20 in 500 mm
Length w/o Blade 12.7 ft in 3860 mm
Width Over Tracks 9.2 ft in 2794 mm
Height to Top of Cab 10.5 ft in 3195 mm
Length of Track on Ground 9.5 ft in 2871 mm
Ground Clearance 1.3 ft in 383 mm
Financing Calculator*
Monthly Payment
3 Year$6,233 - $6,688
5 Year$4,209 - $4,698

More Equipment Info
*Rates are approximate. For Companies with lower credit ratings, rates may be increased. All rates are subject to credit approval, and subject to change until funding occurs.
Shipping Calculator