Make an Offer!
HOURS: 6444

2013 Caterpillar D6T XW

2013 Cat D6T XW, VPAT, A02912 - $198,000
Listing Type: For Sale

Category: Heavy Equipment > Crawler Dozers & Loaders
Location: Bellevue, IA
Make: Caterpillar
Model: D6T XW
Year: 2013
Hours: 6444



Equipment Specifics
Inventory ID: A02912
Make: Caterpillar
Model: D6T XW
Model Year: 2013
Hours: 6444
Blade, Bucket Type: Blade - 6-Way
Condition: Used
Net Horsepower (HP): 230
Operating Weight: Over 50,000 lbs
Track Type: Standard
Type: Crawler Dozer
Item Description

2013 Cat D6T XW, VPAT, 6,500 hours, ARO Accugrade GPS Ready, less than 300 hours on 100% New undercarriage and Engine Rebuild. Multi Shank Ripper, Machine is good as they come, straight, clean & original with documented history. Rent or Buy.
Engine in-frame Rebuild and injectors replaced less than 100 hours ago
•  6,444 Total Hours, ECM verified
•  2,000 hours where at Idle, ECM verified
•  4,444 actual “ in operation” hours on this machine
•  1,382 average lifetime RPM, as recorded by the ECM
•  5.15 gallons per Hour, average lifetime fuel Rate, as recorded by the ECM
•  44% average lifetime load factor, as recorded by the ECM
•  Original Paint, Original condition machine
•  100% New Undercarriage installed less than 300 hours ago. All other measurements listed below
•  Factory ARO, Cat Accugrade GPS Ready
•  Enclosed Cab, A/C, Heat
•  Diff Steer
•  VPAT, Variable Power Angle Tilt, 6 Way Blade
•  Rear Multi Shank ripper, w/ 3 shanks
•  Lights option installed
•  Factory Fuel Tank Guarding
•  Cat C9.3 Accert Engine, 230 HP
•  53,000 Pounds, operating weight
Undercarriage measures as follows, (Based on Cat spec 120% being New):
•  Heavy Duty Standard Undercarriage – less than 300 hours since replaced
•  Rail/Chain height measure 120% Remaining
•  Links/Bushings on rails measure 108% Remaining
•  Pads/Grousers – 110% Remaining, 26” wide Track pads
•  Sprockets Measure – 96% Remaining
•  Front Idlers –average  120% Remaining
•  Rear Idlers – average 120% Remaining
•  Bottom Rollers - average 112% Remaining
•  Top Carrier Rollers – Average 112% remaining

This machine is straight and clean with a good history, came in from excellent reputation contractor in ND. Very good preventative maintenance.

This machine is undergoing an extensive, quality assurance mechanical inspection at our facility, including a full Cat TA2 pressure testing inspection. Please call or email to have additional information, testing reports, and documentation emailed to you.

We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. We offer Fair freight rates to any end point, and financing programs if needed.
Please visit our home webpage to watch our company video and learn more about J.J. Scheckel Corporation.  

Make Caterpillar
Model C9 ACERT
Gross Power 228 hp 170 kw
Net Power 200 hp 149 kw
Power Measured @ 1850 rpm
Displacement 537 cu in 8.8 L
Number of Cylinders 6
Operating Weight 46703 lb 21184 kg
Fuel Capacity 112 gal 424 L
Cooling System Fluid Capacity 18.5 gal 76.8 L
Engine Oil Capacity 7.4 gal 28 L
Hydraulic Fluid Capacity 13.6 gal 51.5 L
Powertrain Fluid Capacity 38.5 gal 145.7 L
Final Drives Fluid Capacity 3.6 gal 13.6 L
Operating Voltage 24 V
Alternator Supplied Amperage 95 amps
Type Powershift
Number of Forward Gears 3
Number of Reverse Gears 3
Max Speed - Forward 7.1 mph 11.4 km/h
Max Speed - Reverse 9 mph 14.6 km/h
Ground Pressure 6.7 psi 46.3 kPa
Ground Contact Area 6780 in2 4.4 m2
Standard Shoe Size 30 in 760 mm
Number of Shoes per Side 41
Number of Track Rollers per Side 7
Track Pitch 8 in 203 mm
Hydraulic System
Relief Valve Pressure 2799 psi 134 kPa
Pump Flow Capacity 49.9 gal/min 189 L/min
Standard Blade
Width 13.8 ft in 4200 mm
Height 46 in 1169 mm
Capacity 5.6 yd3 4.3 m3
Cutting Depth 20 in 500 mm
Length w/o Blade 12.7 ft in 3860 mm
Width Over Tracks 9.2 ft in 2794 mm
Height to Top of Cab 10.5 ft in 3195 mm
Length of Track on Ground 9.5 ft in 2871 mm
Ground Clearance 1.3 ft in 383 mm
Financing Calculator*
Monthly Payment
3 Year$6,671 - $7,158
5 Year$4,505 - $5,028

More Equipment Info
*Rates are approximate. For Companies with lower credit ratings, rates may be increased. All rates are subject to credit approval, and subject to change until funding occurs.
Shipping Calculator