Make an Offer!
HOURS: 2525

2013 Caterpillar D6T XW

Listing Type: For Sale

Category: Heavy Equipment > Crawler Dozers & Loaders
Location: Bellevue, IA
Make: Caterpillar
Model: D6T XW
Year: 2013
Hours: 2525



Equipment Specifics
Inventory ID: A02952
Make: Caterpillar
Model: D6T XW
Model Year: 2013
Hours: 2525
Blade, Bucket Type: Blade - 6-Way
Condition: Used
Net Horsepower (HP): 230
Operating Weight: Over 50,000 lbs
Track Type: Standard
Type: Crawler Dozer
Item Description

2013 Cat D6T XW, VPAT, 2,525 total hours, 744 idle hours, only 1,781 actual working hours on this machine. ARO Accugrade GPS Ready, Allied W6G Winch. Machine is good as they come, straight, clean & original with documented history. Rent or Buy. Read the details:

• 2,525 Total Hours, ECM verified
• 744 Hours where at Idle, ECM verified
• Only 1,781 actual working hours on this machine
• 1,407 average lifetime RPM, as recorded by the ECM
• 5.47 Gallons per hour, average lifetime fuel rate, as recorded by the ECM
• 47% Average lifetime load factor, as recorded by the ECM

• Original paint, Original condition machine

• Factory ARO, Cat Accugrade GPS Ready
• Enclosed Cab, A/C, Heat
• Rear Screen
• Light Kit
• Diff Steer
• VPAT, Variable Power Angle Tilt, 6 Way Blade
• Allied W6G Winch
• Factory Fuel Tank Guarding
• Cat C9 Accert Engine, 230 HP
• 53,000 Pounds operating weight

Undercarriage measures as follows (Based on Cat spec 120% being New):
• Cat System 1 Undercarriage
• Chain Links/Bushings on rails measure 88% Remaining
• Pads/Grousers – 53% Remaining, 28” wide Track pads
• Sprockets Measure – 93% Remaining
• Front Idlers –average 88% Remaining
• Rear Idlers – average 88% Remaining
• Bottom Rollers – average 78% Remaining

This machine just came in from pipeline service company. It would be hard to find a nicer, lower hour machine at this price. This machine is straight, clean, and original. Very low utilization, and very low original hours for the year model. Very hard to find them like this.

This machine is currently undergoing an extensive, quality assurance mechanical inspection at our facility, including a full CAT TA2 pressure testing inspection. Please call or email to have additional information, testing reports, and documentation emailed to you.

We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. We offer fair freight rates to any end point, and financing programs if needed.

Please visit our home webpage to watch our company video and learn more about J.J. Scheckel Corporation.

Make Caterpillar
Model C9 ACERT
Gross Power 228 hp 170 kw
Net Power 200 hp 149 kw
Power Measured @ 1850 rpm
Displacement 537 cu in 8.8 L
Number of Cylinders 6
Operating Weight 46703 lb 21184 kg
Fuel Capacity 112 gal 424 L
Cooling System Fluid Capacity 18.5 gal 76.8 L
Engine Oil Capacity 7.4 gal 28 L
Hydraulic Fluid Capacity 13.6 gal 51.5 L
Powertrain Fluid Capacity 38.5 gal 145.7 L
Final Drives Fluid Capacity 3.6 gal 13.6 L
Operating Voltage 24 V
Alternator Supplied Amperage 95 amps
Type Powershift
Number of Forward Gears 3
Number of Reverse Gears 3
Max Speed - Forward 7.1 mph 11.4 km/h
Max Speed - Reverse 9 mph 14.6 km/h
Ground Pressure 6.7 psi 46.3 kPa
Ground Contact Area 6780 in2 4.4 m2
Standard Shoe Size 30 in 760 mm
Number of Shoes per Side 41
Number of Track Rollers per Side 7
Track Pitch 8 in 203 mm
Hydraulic System
Relief Valve Pressure 2799 psi 134 kPa
Pump Flow Capacity 49.9 gal/min 189 L/min
Standard Blade
Width 13.8 ft in 4200 mm
Height 46 in 1169 mm
Capacity 5.6 yd3 4.3 m3
Cutting Depth 20 in 500 mm
Length w/o Blade 12.7 ft in 3860 mm
Width Over Tracks 9.2 ft in 2794 mm
Height to Top of Cab 10.5 ft in 3195 mm
Length of Track on Ground 9.5 ft in 2871 mm
Ground Clearance 1.3 ft in 383 mm
Financing Calculator*
Monthly Payment
3 Year$9,704 - $10,412
5 Year$6,553 - $7,313

More Equipment Info
*Rates are approximate. For Companies with lower credit ratings, rates may be increased. All rates are subject to credit approval, and subject to change until funding occurs.
Shipping Calculator