Make an Offer!
HOURS: 5250

2013 Caterpillar D9T

2013 Cat D9T, Crawler Tractor,  A02864
Listing Type: For Sale

Category: Heavy Equipment > Crawler Dozers & Loaders
Location: Bellevue, IA
Make: Caterpillar
Model: D9T
Year: 2013
Hours: 5250
Serial Number: Twf A02864



Equipment Specifics
Inventory ID: A02864
Make: Caterpillar
Model: D9T
Model Year: 2013
Hours: 5250
Serial Number: TWF A02864
Condition: Used
Blade, Bucket Type: Blade - 2-Way
Net Horsepower (HP): 465
Operating Weight: Over 50,000 lbs
Track Type: Standard
Type: Crawler Dozer
Item Description

2013 Cat D9T, 5,250 Total Hours, 517 hours were at idle. U Blade, Multi Shank Ripper, GPS Grade control ready. Machine is in original paint, straight, and clean. Documented maintenance and oil sample history, from excellent home. Read the Details:
•  Original condition, original paint
•  5,250 total frame hours
•  517 Idle Hours, ECM Verified
•  Only 4,733 Actual “in operation” running hours on this machine
•  Average Lifetime RPM, 1,581
•  Lifetime load factor, 77%
•  Lifetime fuel rate, 16.45 Gallons per hour
•  A/C, Heat
•  Multi Shank ripper, with 2 shanks included
•  Machine has U blade w/ twin tilt
•  Safety Railings
•  Engine Enclosures
•  Cat C18, 465 HP Engine
•  106,000 operating weight
Undercarriage measures as follows (Based on Cat spec, w/ 120% remaining being new):
•  Link height on the rail/chain measure - 58% Remaining
•  Bushing Diameter on rail/chain average – 50% remaining
•  Pads/Grousers measure 92% Remaining – 27” Wide Pads
•  Sprockets measure 60% Remaining
•  Qty 2, Front Idlers average 96% remaining
•  Qty 2, Rear Idlers average 96% remaining
•  Qty 16, Bottom Rollers average 83% Remaining
Here is a straight and Clean low hour D9T, this machine came from good home with documented maintenance and oil sample history. As nice as they come.

This machine is currently undergoing an extensive, quality assurance work order inspection at our facility, including a full Cat TA2 pressure testing inspection. Please call or email to have additional information and documentation emailed to you.

We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. We offer Fair freight rates to any end point, and financing programs if needed.
Please visit our home webpage to watch our company video and learn more about J.J. Scheckel Corporation.  

Make Caterpillar
Model C18 ACERT
Gross Power 464 hp 346 kw
Net Power 410 hp 306 kw
Power Measured @ 1800 rpm
Displacement 1106 cu in 18.1 L
Operating Weight 105600 lb 47900 kg
Fuel Capacity 235 gal 889 L
Cooling System Fluid Capacity 27.5 gal 104 L
Engine Oil Capacity 10 gal 38 L
Hydraulic Fluid Capacity 23.5 gal 89 L
Powertrain Fluid Capacity 43.4 gal 164 L
Final Drives Fluid Capacity 3.9 gal 15 L
Operating Voltage 24 V
Alternator Supplied Amperage 95 amps
Type Power Shift
Number of Forward Gears 3
Number of Reverse Gears 3
Max Speed - Forward 7.3 mph 11.7 km/h
Max Speed - Reverse 8.9 mph 14.3 km/h
Ground Pressure 16.1 psi 110.9 kPa
Ground Contact Area 6569 in2 4.2 m2
Standard Shoe Size 24 in 610 mm
Number of Shoes per Side 43
Number of Track Rollers per Side 8
Track Pitch 9.4 in 240 mm
Track Gauge 7.4 ft in 2250 mm
Hydraulic System
Pump type Piston
Relief Valve Pressure 5875 psi 40500 kPa
Pump Flow Capacity 101 gal/min 383 L/min
Standard Blade
Width 14.3 ft in 4310 mm
Height 6.4 in 1934 mm
Capacity 17.7 yd3 13.5 m3
Cutting Depth 23.9 in 606 mm
Length w/o Blade 16.1 ft in 4912 mm
Length w/ Blade 21.8 ft in 6630 mm
Width Over Tracks 9.4 ft in 2865 mm
Height to Top of Cab 12.5 ft in 3815 mm
Length of Track on Ground 11.4 ft in 3474 mm
Ground Clearance 2 ft in 596 mm
Financing Calculator*
Monthly Payment
3 Year$20,823 - $22,342
5 Year$14,061 - $15,693

More Equipment Info
*Rates are approximate. For Companies with lower credit ratings, rates may be increased. All rates are subject to credit approval, and subject to change until funding occurs.
Shipping Calculator