Make an Offer!
HOURS: 5873

2014 Caterpillar D6T LGP


2014 Cat D6T LGP, VPAT, A02658
$220,000
Listing Type: For Sale

Category: Heavy Equipment > Crawler Dozers & Loaders
Location: Bellevue, IA
Make: Caterpillar
Model: D6T LGP
Year: 2014
Hours: 5873
Serial Number: Ksb


Phone:

Email:

Photos
Equipment Specifics
Inventory ID: A02658
Make: Caterpillar
Model: D6T LGP
Model Year: 2014
Hours: 5873
Serial Number: KSB
Condition: Used
Blade, Bucket Type: Blade - 6-Way
Net Horsepower (HP): 230
Operating Weight: Over 50,000 lbs
Track Type: LGP
Type: Crawler Dozer
Item Description

2014 Cat D6T LGP, VPAT, 5,873 hours, 1,293 idle hours, ARO Cat Accugrade GPS Ready. Rear Multishank Ripper, Erops, A/C, Diff Steer, VPAT 6 Way Blade, Machine is straight, clean & Original with documented history. Rent / Lease or Buy.
 
· KSB Serial Number Prefix
· 5,873 Total Hours, ECM verified
· 1,293 hours where at Idle, ECM verified
· Only 4,580 actual hours in operation for this machine
· 1,532 average lifetime RPM, as recorded by the ECM
· 6.68 gallons per Hour, average lifetime fuel Rate, as recorded by the ECM
· 57% average lifetime load factor, as recorded by the ECM
 
· Original Paint, Original condition machine
                                                                                                                                                               
· Factory ARO, Cat Accugrade GPS Ready
· Enclosed Cab, A/C, Heat
· Rear Screen
· Diff Steer
· VPAT, Variable Power Angle Tilt, 6 Way Blade
· Rear Multi Shank Ripper, w/ 3 shanks included
· Lights option installed
· Heavy Duty Hinged Radiator Guard
· Factory Fuel Tank Guarding
· Cat C9.3 Accert Engine, 230 HP
· 53,000 lbs operating weight
 
Undercarriage measures as follows (Based on Cat spec 120% being New):
· Cat System 1 Undercarriage
· Rail/Chain height measure 108% Remaining, Cat part # 234-9699
· Links/Bushings on rails measure 112% Remaining
· Pads/Grousers – 110% Remaining, 31” wide Track pads
· Sprockets Measure – 99% Remaining
· Front Idlers – 120% Remaining
· Rear Idlers – 120% Remaining
· Bottom Rollers - average 95% Remaining
 
· This machine qualifies for Rent, Lease & Finance options
 
· We Can Remove Ripper, and provide credit to buyer, if it is not needed
 
This machine is in from respected pipeline contractor. The machine is in excellent condition, and as nice, clean and original as we can find them. The machine has documented service history, and is set up beautifully, ARO GPS Ready, 6 way blade, and rear ripper. We are not finding any flaws with the machine. Should be a very solid unit both mechanically and cosmetically.

 This Machine is scheduled to go through our shop, for an extensive, pre-sale, pre-rent work order. Please call for complete Work order detailed description. A few processes this machine will get, will be a Full Cat TA2 Pressure Testing Report, for the Engine, Transmission, Torque, and Hydraulic System. We will also service all oils and filters on the machine, and several other detailed procedures to insure this machine is ready to go to the field and work as intended.

  Please call or email us, to request additional information, Work Orders, UC Measurements, and Full Pictures for this machine. We can also get you very fair freight rates, to anywhere in the country.
 
 We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website, www.jjscheckel.com.

Specification
Engine
Make Caterpillar
Model C9 ACERT
Gross Power 228 hp 170 kw
Net Power 200 hp 149 kw
Displacement 537 cu in 8.8 L
Operational
Operating Weight 48024 lb 21783 kg
Fuel Capacity 112 gal 424 L
Cooling System Fluid Capacity 18.5 gal 76.8 L
Engine Oil Capacity 7.4 gal 28 L
Hydraulic Fluid Capacity 13.6 gal 51.5 L
Powertrain Fluid Capacity 38.5 gal 145.7 L
Final Drives Fluid Capacity 3.6 gal 13.6 L
Operating Voltage 24 V
Alternator Supplied Amperage 95 amps
Transmission
Type Powershift
Number of Forward Gears 3
Number of Reverse Gears 3
Max Speed - Forward 7.1 mph 11.4 km/h
Max Speed - Reverse 9 mph 14.6 km/h
Undercarriage
Ground Pressure 5.2 psi 35.5 kPa
Ground Contact Area 9288 in2 6 m2
Standard Shoe Size 36 in 915 mm
Number of Shoes per Side 45
Number of Track Rollers per Side 8
Track Pitch 8 in 203 mm
Hydraulic System
Relief Valve Pressure 2799 psi 19300 kPa
Pump Flow Capacity 49.9 gal/min 189 L/min
Standard Blade
Width 13.3 ft in 4063 mm
Height 44 in 1101 mm
Capacity 4.9 yd3 3.8 m3
Cutting Depth 26 in 655 mm
Dimensions
Length w/o Blade 13.9 ft in 4247 mm
Width Over Tracks 10.5 ft in 3193 mm
Height to Top of Cab 10.7 ft in 3245 mm
Length of Track on Ground 10.8 ft in 3275 mm
Ground Clearance 1.4 ft in 433 mm
Financing Calculator*
Monthly Payment
3 Year$7,413 - $7,954
5 Year$5,006 - $5,587

More Equipment Info
*Rates are approximate. For Companies with lower credit ratings, rates may be increased. All rates are subject to credit approval, and subject to change until funding occurs.
Shipping Calculator